Annual Vehicle Inspection Report - Stock, 3-Ply, Carbonless
Snap-out format, 8-1/2" x 11-3/4"
Reg Alert: A new FMCSA rule requires motor carriers to inspect their vehicles’ rear impact guards as part of the annual inspection, starting Dec. 9, 2021. Most (but not all) CMVs are required by 49 CFR §393.86 to have a rear impact guard that meets specific criteria. To pass an annual inspection, a rear impact guard must meet the standards listed in item #15 in Appendix A to Part 396. The inspection form must include “rear impact guard” (either pre-printed or written by hand) as one of the items inspected.
- Helps you meet DOT's annual vehicle inspection requirements under §396.21
- Also includes Minimum Periodic Inspection Standards (Part 396, Appendix G to Subchapter B) on the back of the forms to reinforce the vehicle inspection requirements
- Durable 100 lb. manila ply helps preserve the report
- Snap-out format
- Three plies
- Carbonless
- Measures 8-1/2" W x 11-3/4" L
- Personalized version also available
- Made in the USA
View Sample
View a printable PDF of the updated information regarding the amended inspection standards in Appendix A.
View a sample Annual Vehicle Inspection Report.
Carbon Type: Carbonless
Number of Plies: 3
Compliance Topic: Vehicle Inspections & Maintenance
Size: 8.5" x 11"
Format: Snap-out
Need to Purchase a Case?: 500 per case
Industry: Transportation
Average Rating: 4.8
BVNumberOfReviews: 28, 29, 30, 32, 31
UNSPSC Number: 14111531
Advantage Savings: Advantage Savings
Country Of Origin: USA